Inquiries:
972 / 938 - 7280

Local, National, Global Productivity Solutions for Pest Management, Distribution, and Food Industries

There are 5 tasks that need to be performed after Hard Booting a Symbol 8800 Scanner aside from the "Welcome" process (Screen calibration, etc...):

 1) Resetting the ActiveSync Baud Rate
 2) Resetting the Time/Date
 3) Program the Scanner
 4) Load Inspector Data
 5) Configure Internet DialUp Connection (if using Scanner FTP)

 Resetting the ActiveSync Baud Rate:

a) Click "Start" -> "ActiveSync"
b) Click "Tools" in the bottom left corner
c) Click "Options..." on the pop-up menu
d) Click the "Options.." button near center-right of screen
e) Checkmark is set for "Enable PC sync using this
    connection:"

f) Change the baud rate to:
        i.) 57,600 if you have NOT run "Initialize Scanner"
            from within U-Trap-It on the desktop PC.

        ii.) 115,200 if you HAVE run "Initialize Scanner"  from
            within U-Trap-It on the desktop PC.

g) Select "Disconnect when done"
h) Click "OK" in the top right corner
    (this takes you back to the PC Synch screen)
i) Click "OK" in the top right corner, again
    (this takes you back to the first ActiveSync screen)
j) Click the "X" in the top right corner
   (this takes you back to the Today screen)
 

This task is done.

Top

Resetting the Time and Date:

a) Click "Start" -> "Settings"
b) Click the "Systems" tab at the bottom of the screen
c) Click the "Clock" icon
d) Make sure that "Home" is selected
e) Set the Time Zone, Date, and Time to the proper settings
    for your location.

This task is done.

Top

Program Scanner with Software

 Within U-Trap-It on the Desktop PC, run "Program Scanner (with Software)"

      This task is done.

Top

Loading Inspector Data

 Within U-Trap-It on the Desktop PC, run "Load CE Device with Inspector Data"

      This task is done.

Top

Reconfiguring your Internet Dial Up Connection:

Note: Step 5 is only for those clients using FTP on their scanners.

If you don't use FTP on your scanner, then YOU ARE DONE.

Follow the link below for detailed configuration instructions
DialUp8800

     After completing the DialUp configuration, you are done.

Top